CivArchive
    MiniMax H3 Ultimate 12GB — T2V/I2V/FFLF/R2V/Multiframe/ControlNet/Extend, one dropdown, with audio - v2.4.0
    NSFW

    ☕ One coffee = one happy creator: https://buymeacoffee.com/the_frizzy1


    Eight of the nine local MiniMax H3 modes in one workflow, picked from one dropdown. Text to video, image to video, last frame, first+last, references, multiframe, ControlNet pose and Extend a clip. Every mode comes out with sound.

    What you need

    ✔ Custom nodes — None. Core ComfyUI only.
    ✔ ComfyUI version — 0.39.2 for v2.3.0 (native MiniMax H3, SDPose, Switch / Custom Combo / Math Expression, Trim Audio Duration). The benchmark table below was run on 0.37.4.
    ✔ VRAM — 12 GB — tested, not estimated. Peak 11.3–11.6 GB
    ✔ System RAM — 32 GB. It peaks at 17–22 GB, so close your other big apps
    ✔ Tested on — RTX 3060 12 GB · 32 GB DDR4 · ComfyUI 0.37.4 (Sage attention); v2.3.0 on ComfyUI 0.39.2
    ✔ Licence — Workflow MIT · MiniMax H3: MiniMax H3 Community License

    Models to download

    Click a file name to download it. Put it in the folder shown, inside ComfyUI/models/. Every file name was read from the workflow .json.

    Required — all 10 files, about 69 GB. Text and image to video only (including last frame, first + last and extend) needs 5 of them, about 42 GB: the FL2VA model, the FL2V turbo LoRA, the text encoder and both VAEs.

    Comfy-Org/MiniMax-H3

    diffusion_models/

    File: minimax_h3_fl2va_pruned_int8_convrot.safetensors — 21.0 GB (12 GB (tested))
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/diffusion_models/minimax_h3_fl2va_pruned_int8_convrot.safetensors

    Put it here:
    ComfyUI/models/diffusion_models/

    File: minimax_h3_ref2va_pruned_int8_convrot.safetensors — 21.0 GB (12 GB (tested))
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/diffusion_models/minimax_h3_ref2va_pruned_int8_convrot.safetensors

    Put it here:
    ComfyUI/models/diffusion_models/

    loras/

    File: minimax_h3_fl2v_turbo_8step_v1.0_comfyui_bf16.safetensors — 2.0 GB
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/loras/minimax_h3_fl2v_turbo_8step_v1.0_comfyui_bf16.safetensors

    Put it here:
    ComfyUI/models/loras/

    File: minimax_h3_ref2v_turbo_4step_v0.1_comfyui_bf16.safetensors — 2.0 GB
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/loras/minimax_h3_ref2v_turbo_4step_v0.1_comfyui_bf16.safetensors

    Put it here:
    ComfyUI/models/loras/

    text_encoders/

    File: qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors — 15.7 GB
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/text_encoders/qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors

    Put it here:
    ComfyUI/models/text_encoders/

    vae/

    File: minimax_h3_video_vae_int8_convrot.safetensors — 2.8 GB
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/vae/minimax_h3_video_vae_int8_convrot.safetensors

    Put it here:
    ComfyUI/models/vae/

    File: minimax_h3_audio_vae_fp32.safetensors — 0.6 GB
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/vae/minimax_h3_audio_vae_fp32.safetensors

    Put it here:
    ComfyUI/models/vae/

    model_patches/

    File: minimax_h3_fun_controlnet_union_pruned_int8_convrot.safetensors — 2.3 GB (ControlNet mode)
    Download:
    https://huggingface.co/Comfy-Org/MiniMax-H3/resolve/main/model_patches/minimax_h3_fun_controlnet_union_pruned_int8_convrot.safetensors

    Put it here:
    ComfyUI/models/model_patches/

    Comfy-Org/SDPose — the ControlNet mode's pose models.

    checkpoints/

    File: sdpose_wholebody_fp16.safetensors — 1.9 GB (ControlNet mode)
    Download:
    https://huggingface.co/Comfy-Org/SDPose/resolve/main/checkpoints/sdpose_wholebody_fp16.safetensors

    Put it here:
    ComfyUI/models/checkpoints/

    diffusion_models/

    File: rt_detr_v4-x-hgnet_fp16.safetensors — 0.1 GB (ControlNet mode)
    Download:
    https://huggingface.co/Comfy-Org/SDPose/resolve/main/diffusion_models/rt_detr_v4-x-hgnet_fp16.safetensors

    Put it here:
    ComfyUI/models/diffusion_models/

    Modes

    One Mode dropdown on the node: T2V (prompt) · I2V (First frame) · Last frame · First + last frame · R2V (Reference 1 + 2, write <Picture 1>, <Picture 2> in the prompt) · Multiframe (references + 3 guide frames at the times you set) · ControlNet pose (Reference 1 + video, the pose is read from it) · Extend a clip.

    The inputs start bypassed. Un-bypass only the ones your mode uses (select + Ctrl+B) and keep the rest bypassed. Length in seconds is turned into a valid H3 frame count for you: 5 s = 124 frames. Turbo LoRAs are on by default, 8 steps FL2VA and 4 steps Ref2VA, 20 steps with turbo off. Two LoRA slots sit on the node: strength 0 means the file is never even opened.

    Extend with the clip's sound, new in v2.3.0. The clip's last 0.9 s of sound go in with its last 22 frames. In my test the first 0.9 s of the new clip followed the music's loudness almost exactly with the switch on, envelope match 0.961, and not at all with it off, -0.016. After the join H3 makes new sound for your prompt either way: it did not keep the song going. The result begins with those 22 carried-over frames, so trim about 0.9 s when you join clips.

    Speed on my RTX 3060

    Each mode run once, 5 s clips, turbo on. Wall is queue to finished including model loading, sampling is time in the sampler nodes.

    • T2V — 0.4 MP, 3 min 02 s wall, 2 min 28 s sampling, 11.3 GB peak vram, 16.9 GB peak ram

    • I2V (first frame) — 0.4 MP, 3 min 20 s wall, 2 min 46 s sampling, 11.3 GB peak vram, 17.1 GB peak ram

    • Last frame — 0.4 MP, 3 min 19 s wall, 2 min 46 s sampling, 11.4 GB peak vram, 17.1 GB peak ram

    • First + last frame — 0.4 MP, 3 min 29 s wall, 2 min 54 s sampling, 11.3 GB peak vram, 16.9 GB peak ram

    • R2V (references) — 0.4 MP, 2 min 10 s wall, 1 min 33 s sampling, 11.4 GB peak vram, 16.9 GB peak ram

    • Multiframe — 0.4 MP, 2 min 18 s wall, 1 min 42 s sampling, 11.3 GB peak vram, 16.9 GB peak ram

    • ControlNet (pose) — 0.4 MP, 4 min 59 s wall, 2 min 43 s sampling, 11.3 GB peak vram, 20.1 GB peak ram

    • Extend, with the clip's sound — 0.4 MP, 3 min 51 s – 3 min 53 s wall, — sampling, 11.4 GB peak vram, 19.1 GB peak ram

    • Extend, silent — 0.4 MP, 3 min 31 s – 3 min 33 s wall, — sampling, 11.4 GB peak vram, 19.1 GB peak ram

    At 0.9 MP (1280x736) every mode also ran: 6 min 31 s for Multiframe up to 13 min 07 s for ControlNet, peak VRAM 11.6 GB, peak RAM 18.5–21.8 GB. Keep Megapixels at 0.4 or 0.9 on 12 GB. 1.5 MP spills out of VRAM: T2V timed out after 32 min, so stay at 0.9 or below.

    What did not work

    • An input you are not using, left un-bypassed, gives you "Invalid image file" before the run even starts. ComfyUI checks the file of every active loader, also in modes that never read it.

    • If the mode needs an input and it is still bypassed, the run stops at a "Needs ..." node instead of quietly making a T2V.

    • Downloaded only the 42 GB set? The Ref2VA, Ref2V LoRA, ControlNet, SDPose and RT-DETR loaders go red. Click them and pick any file you have in that folder, they are never loaded in the FL2VA modes.

    • Loaders red although you downloaded everything: your models sit in a sub-folder like diffusion_models/MiniMax-H3/. Re-pick each red loader once.

    • There is no loop node in core ComfyUI yet, so a long video here means running Extend again and again, one clip after another.

    • The ninth H3 mode, a full character swap, is not in here. It runs on Viggle's H3 finetune and needs a custom node pack, so it stayed its own workflow.

    Get the workflow

    More videos on this stuff: https://www.youtube.com/playlist?list=PLMztlpsP7Bgg

    Description

    v2.4.0: Full HD (1088p) dropdown on the node, Off by default, so the default output is the same as v2.3.0. Gentle H3 refine (sigma 0.55) = the H3 Relight recipe: H3 latent upscaler to short side 1088, then 3 Regenerate-2K steps on H3 FL2VA (sigmas 0.55, 0.4, 0.2, 0.0), CFG 1, euler. The draft's sound is kept. Core nodes only. Two new files (2.7 GB): the H3 latent upscaler and the Regenerate-2K LoRA. ComfyUI checks their loaders in every mode, so download them or point the loaders at any file you have. Run on ComfyUI 0.45.3. Needs ComfyUI 0.44+.

    FAQ

    Workflows
    MiniMax H3

    Details

    Downloads
    141
    Platform
    CivitAI
    Platform Status
    Available
    Created
    11/15/2026
    Updated
    11/20/2026
    Deleted
    -

    Files

    The_frizzy1_minimax-h3-ultimate-12gb_v2.4.0.json