CivArchive
    ⚗ AlchemicaSampler — calibrated Krea 2 Turbo workflow (NAG at cfg 1, two-phase prompts, prompt enhancer) - v1.1.4 KREA2 T2I / I2I
    NSFW
    Preview 149436875
    Preview 149436874
    Preview 149436876
    Preview 149436877
    Preview 149436879

    ⚗ AlchemicaSampler for Krea 2 Turbo

    A sampler that measures your checkpoint, then samples the way the model actually works.

    ⚗ Idea and direction: AlchemicaMente · code: Claude (Anthropic) · license: GPL-3.0
    Custom nodes and full documentation: github.com/Nessuno76/ComfyUI-AlchemicaSampler

    What this workflow does

    1. Prompt enhancer built on Krea 2's own text encoder. Write an idea in any language (or connect a reference image). Qwen3-VL-4B, the very encoder Krea 2 uses, writes a SCENE, a DETAIL and a NEGATIVE prompt. No Ollama, no external server.

    2. NAG, a negative prompt that works at cfg 1. Krea 2 Turbo is distilled, so the usual negative prompt does nothing. NAG applies the negative inside the attention of every DiT block. Starting at the calibrated hand-off sigma, it removes what you don't want without changing the picture (measured: 99.3 % identical image, unwanted water drops gone).

    3. Two-phase prompt. The scene leads until the composition locks (σ ≈ 0.87, measured); the detail prompt leads after that. Same picture, different rendering of skin, fabric and materials.

    4. Calibrated sampling. A calibration run measures your checkpoint on your GPU and builds the step schedule, the two-stage hand-off and the detail window from those measurements.

    5. Composition previews. Generate 4–8 small previews, pick one, render it at 4 MP with the same composition.

    Requirements

    • ComfyUI 0.36.0+

    • Custom nodes: ComfyUI-AlchemicaSampler (GitHub link above, or search "AlchemicaSampler" in ComfyUI-Manager)

    • krea2_turbo_nvfp4.safetensors or krea2_turbo_fp8_scaled.safetensors → models/diffusion_models

    • qwen3vl_4b_fp8_scaled.safetensors → models/text_encoders

    • qwen_image_vae.safetensors → models/vae

    • 16 GB VRAM for 4 MP (NVFP4). On RTX 50-series use a PyTorch build for CUDA 13.0 (cu130) for full NVFP4 speed.

    How to use

    1. Install the custom nodes and restart ComfyUI.

    2. Run KREA2_TARATURA once with your checkpoint (≈15–20 min at 4 MP). It is optional but recommended: without it the nodes fall back to default values.

    3. Open KREA2_COMPLETO, type your idea in the enhancer, press Queue.

    4. To remove something from the image, write it in the negative (or keep the enhancer's). NAG 3 from −1 is preset.

    5. To explore compositions: set anteprime (previews) = 8 with the seed on fixed, pick a number, set anteprime = 0 and scelta (choice) = that number.

    • Resolution: 4 MP (5 MP only for close-ups)

    • modo (mode): equilibrato (balanced)

    • dettaglio (detail boost): 0.12

    • varieta (variety): 0.6

    • NAG: scale 3 · tau 2.5 · alpha 0.25 · from −1

    • Structure guidance: off (PAG 0.5–1 from −1 for a crisper, more contrasty look)

    Timing on an RTX 5070 Ti at 4 MP: ~63 s without NAG, ~85–95 s with NAG. The first run of the complete workflow takes longer because the text encoder writes the prompts; they stay cached until you change the idea.

    Honest notes

    • The detail prompt changes texture, not colours or style: Krea 2 Turbo decides those in the first step.

    • PAG is a style (crisper, fewer freckles), not an absolute improvement. SEG above 0.3 makes halos.

    • NAG and the enhancer are written for Krea 2 only.

    License

    Workflows and nodes: GPL-3.0. Models are not included: Krea 2 is under the Krea 2 Community License (commercial use only below USD 1M annual revenue; acceptable-use and content-filtering obligations). Qwen3-VL-4B: Apache-2.0.

    Thank you

    To ComfyUI and its contributors, Krea, the Qwen team, Kostiantyn Hrytsuk (KreaPhoton, CyberKrea), Auryg, the authors of NAG, PAG and SEG, pamparamm, pythongosssss and the whole ComfyUI and Civitai community.

    Thank you to everyone who will use this, to everyone who will help us, and to the whole community. And if this idea brings even a little progress, we will be happy. ⚗ — AlchemicaMente

    Description

    • ALCHEMICA_T2I: Load Krea 2 → LoRA Stack+ → Prompt → KSampler Flex → Save. Write an idea in any language and Krea 2's own text encoder writes the prompt. Framing and look presets with thumbnails sit at the bottom of the Prompt node: shot, camera angle, view, light, atmosphere and background.

    • ALCHEMICA_I2I: load a photo, press Queue, then drag the before / after slider. The front of the workflow is simple (photo, what to do, prompt). The groups hold the rest: a mask to change only one zone, LoRA Stack+, Black and White, and a SeedVR2 upscale group that stays bypassed until you enable it.

    Different, not better. On the same seed the Alchemica recipe gives another picture than ComfyUI's KSampler, not a guaranteed improvement. The same KSampler Flex node also does standard sampling (euler + simple, two_stage off), so you keep the tools and choose the look.

    Install from ComfyUI-Manager. 1.1.4 is the first 1.1 version that passed the Comfy Registry scan. The nodes only talk to ComfyUI: no online services and no Ollama.

    New since 1.0

    • ⚗ LoRA Stack+: as many LoRAs as you need, real strengths and previews. Trigger words are added to the prompt automatically, and ▲ ▼ try the previous or next LoRA.

    • ⚗ LoRA A/B: the same photo with and without your LoRAs in one run, shown in the before / after slider.

    • ⚗ Black and White: seven darkroom controls (auto levels, shadows, highlights, clarity, sharpness, vignette).

    • ⚗ Load Image Folder: one photo of a folder per run, to process a whole folder.

    • ⚗ Prompt: framing and look presets with thumbnails, opening phrases, compact view.

    Fixes

    • Two or more people in a wide frame: the second person is no longer broken into fragments.

    • Orientation written in the text: "Vertical 9:16 frame" now wins over aspect, so a vertical scene is no longer squeezed into 16:9.

    • Framing filter: it removes only what the frame hides. In a chest-up shot, "a red jacket and jeans" now keeps the jacket.

    • LLM negative: a looping negative is cut where the loop starts, and the negative no longer works against text written in quotes.

    • Calibration: it takes an optional negative, for models used at a real cfg.

    Requirements

    • ComfyUI 0.36+ and the custom nodes ComfyUI-AlchemicaSampler 1.1.4 (from ComfyUI-Manager or https://github.com/Nessuno76/ComfyUI-AlchemicaSampler).

    • Models:

      • krea2_turbo_nvfp4.safetensors (or fp8) → models/diffusion_models

      • qwen3vl_4b_fp8_scaled.safetensors → models/text_encoders

      • qwen_image_vae.safetensors → models/vae

    • 16 GB of VRAM for 4 MP. On RTX 50-series cards, use PyTorch for CUDA 13.0 (cu130) for full NVFP4 speed.

    Full changelog: https://github.com/Nessuno76/ComfyUI-AlchemicaSampler/blob/main/CHANGELOG.md

    Using MOSS-Image? It has its own pack, ⚗ AlchemicMoss: https://github.com/Nessuno76/ComfyUI-AlchemicMoss

    FAQ

    Workflows
    Krea 2

    Details

    Downloads
    54
    Platform
    CivitAI
    Platform Status
    Available
    Created
    11/18/2026
    Updated
    11/22/2026
    Deleted
    -

    Files

    AlchemicaSampler_1.1.4_workflows.zip

    Mirrors