Cum Amount Slider | KREA2

Controls the amount of cum with positive and negative weights.
通过正负权重控制 CUM 的数量。

• Positive weight: increases the amount
  正权重： 增加数量

• Negative weight: may reduce the amount
  负权重： 理论上可以减少数量

• Recommended range: -2 to 1.5
  推荐范围： -2 到 1.5

At least one cum-related term must be included in the prompt. Add nude when you want the character to remain unclothed.
提示词中必须至少包含一个 cum 相关词。需要裸体效果时请同时加入 nude，否则部分底模可能会自动生成衣物。

This slider was trained on my custom merged KREA2 Raw base. The original KREA2 Raw base performs poorly when training heavier NSFW concepts, so results depend heavily on the base model and supporting LoRAs.
本滑块使用我的自制融合 KREA2 Raw 底模训练。原始 KREA2 Raw 在重度 NSFW 概念训练中的表现较弱，因此实际效果会明显受到所用底模和辅助 LoRA 的影响。

Recommended Setups｜推荐搭配

Method 1: Original KREA2 FP8 base + a dedicated NSFW LoRA
方案一： KREA2 原版 FP8 底模 + 专门的 NSFW LoRA

Method 2: Use the Porn Master base model directly
方案二： 直接使用 Porn Master 底模

This slider controls quantity only. For better texture, dripping, strings and skin adhesion, I also recommend using a dedicated cum-quality LoRA.
本滑块只负责控制数量。想改善滴落、拉丝、附着感和整体材质，建议再搭配专门的 CUM 质量 LoRA。

Localized Control Tip｜局部控制技巧

To focus the effect on a specific area, add terms such as:

cum on breasts · cum on cleavage · cum on face · cum on thighs

Keep the slider weight at 1 or below for more stable localized control.
想集中控制某个部位时，可以加入以上部位词，并将滑块权重控制在 1 或以下；根据我的测试，局部控制会更加稳定。

Text-driven training keeps its influence on character identity and art style relatively low, making it suitable for use with character LoRAs.
由于采用纯文本驱动训练，它对人物一致性和画风的影响较小，适合与人物 LoRA 叠加使用。

ANIMA CUM Slider V2 Update

V2 greatly improves overall stability while keeping the original effect.
V2 在保留原有效果的同时，大幅提升了整体稳定性。

• More powerful results; recommended strength range: 0.5–2.0

• 效果更强力，推荐强度范围0.5-2.0

• Significantly reduced unintended pose and composition changes.

• 明显减少姿势与构图被意外改变的问题。

• Reduced style drift and image distortion at higher weights.

• 降低高权重下的画风偏移和画面变形。

• More consistent results across different characters, styles, and LoRAs.

• 搭配不同角色、画风和人物 LoRA 时，效果更加稳定一致。

The usage method remains the same as V1.
使用方式与 V1 保持一致。

使用建议：

• 推荐权重范围：0.8 ~ 2.0

• 1.0 以下效果较弱，1.2~1.8 效果最自然

• 最高可以拉到 2.5~3.0（会开始模糊并出现 artifact）

• 重要：提示词里必须包含至少一个 “cum” 相关的 tag，否则几乎没有效果

• 一个 cum tag 效果不够明显时，建议叠加 2~3 个不同 cum tag + 高权重，就能达到示例图那种大量覆盖的效果

小技巧： 如果想专注某个部位的精液量，可以叠加 cum on breasts、cum on cleavage、cum on face、cum on thighs 等部位词，再搭配不高于 2.0 的权重，效果在我测试时还不错。

推荐触发词 / Trigger Words： cum on body, bukkake, excessive cum, covered in semen, dripping cum, cum everywhere, cum on breasts, cum on face, cum on hair, cum on thighs, thick semen, shiny semen，

任何带 “cum” 的词都可以作为触发，叠加使用效果更好。

注意身体！ （别一直拉满权重猛看，适当休息哦😂）

After failing multiple attempts at training left/right facing slider LoRAs (Anima models are really stubborn with directional posing), I made this Cum Slider LoRA to cheer myself up lol.

This is a strength-controllable cum slider LoRA. The higher the weight, the more semen appears on the character — from light to extremely heavy coverage.

Usage Recommendations:

• Recommended strength: 0.8 ~ 2.0

• Below 1.0 the effect is weak

• 1.2~1.8 usually gives the best natural results

• Can go up to 2.5~3.0 (will start to blur and produce artifacts)

• Important: Your prompt must contain at least one "cum" related tag, otherwise the LoRA barely works

• If one tag isn’t strong enough, stack 2-3 different cum tags + higher weight to reach the heavy coverage shown in examples

Pro Tip: If you want to focus cum on a specific body part, stack tags like cum on breasts, cum on cleavage, cum on face, cum on thighs, etc., combined with strength ≤ 2.0. Works really well

Recommended Triggers: cum on body, bukkake, excessive cum, covered in semen, dripping cum, cum everywhere, cum on breasts, cum on face, cum on hair, cum on thighs, thick semen, shiny semen

Any tag containing “cum” works. Stacking multiple tags gives stronger results.

Take care of your body! (Don’t go full power all the time😂)