@definitelynotadog  finally got it working well using one of your workflows in the videos, it produced hardly any liquid when i used my usual 2 step workflow so its a a bit fussy about the workflow used , very nice work , and yes it does men with penises as well , this and your fingering lora a the best yet available.

@mofo69 for good results with cum you need workflow with 1 sampler, im using this one https://civitai.com/models/1474890/wan-i2v-with-720p-smoothing?modelVersionId=1695382

@definitelynotadog Most welcome and thank you! ^_^

exactly, they divided the WAN models by type but messed up everything in the search and generation

@definitelynotadog interesting, well, I have been trying all evening to get comfy ui to work right, I have been using Forge forever since I have only made images. I just don't understand why it isn't wanting to run. especially the node manager. really driving me nuts.

@definitelynotadogI hope it'll fix it up because it's a pity not to use this great lora again for your return

yes me too!!

Its mostly luck with the seed.
Try to avoid something like "holding an erect penis" in the prompt, because thats visible and WAN dont need to get that info for the movement.
For realistic videos I add https://civitai.com/models/906812/male-masturbation-wan-video-21-i2v-14b?modelVersionId=1493289 with a weight about 0.7-0.8. Anime wont like that, but try it also with a weight like 0.5
Also I have the feeling, that it depends on the position of the hand in the image - where is it, where is the dick in the image etc pp

It works fine with realistic images,
but the liquid didn’t look good in the anime style.
However, the results were better when using images where a liquid object was already present.

Hands don't move for my realistic or anime images. Plenty of cum, but no jerkin' it.

@definitelynotadog 6-8.

You can generate videos yourself but it requires quite a bit of downloading, configurations, and decent specs. You need a minimum of 8gb vram to generate a 480p video. Search up tutorials on how to download comfyui, then search up how to download wan 2.1 locally.

@jaykob do You Have link?

@alexrakoon https://huggingface.co/Comfy-Org/Wan_2.1_ComfyUI_repackaged/tree/main/split_files
models are downloaded here
www.youtube.com/watch?v=vQyLzgFprFU&pp=0gcJCdgAo7VqN5tD
simple tutorial here

alexrakoon  https://www.youtube.com/watch?v=2AuR1FP57XU simplest one you can do and just add loraloadermodelonly, you can have multiple lora for this

alexrakoonthe one i linked is low steps so much faster generation 

Framepack kinda sucks asss unless it's for very simple animations then it works alright. Theres framepack studio but it doesnt seem to load LORAs for me anyway

That's the point I'm getting at. Framepack could be great if you could use lora's.

dcgerard95 Yeah after a week or so of trial and error i just use ComfyUI now with Wan 2.1 , it's more complicated and more annoying than Framepack but it does work (with LORAs too)

write in negative prompt "liquid from mouth" and dont let the cumshot reach the border of the video above, otherwise he will drop the cum from above and therefore on the face, always leave a lot of space above so that the orgasm never reaches the ceiling of the image

New to this, but I think you can use the download button on civitai to download the video, and if it has the right metadata, you can just open the video in comfyui as if it were a workflow file. Either (file>open) or drag and drop.

@aldolang42 yes i discovered this few days ago lol.

yes. works well .75 strength on low model only. dont add to high noise model.

goodstrk My God man... You're a genius! The one combination I never even thought of and it freakin works! Thank you!

OrionMoonstone  i stole ot from other users lol. it still needs some fine tune.

goodstrk I hear ya, I've been going batty looking for info on how to make this work, short of giving up and switching back to Wan 2.1. So far so good with straight up Wan + TeaCache + Hypertile but that good ole river of nut seems to fizzle down to a few drips once I throw the speedup loras into the mix. lol

OrionMoonstone  in a couple weeks people will discover even better ways. we have already cracked a few nuts and its only been out for a couple weeks. ill come back to comment if i find better flows.

goodstrk Cool cool. All for the nut!

OrionMoonstone always!

Oo, we need to only add An 2.1 lora in the low noise model. I never through of that, and always put my 2.1 in both with 1 strength. And all the jerking off 2.1 models never worked as expected, lol.
No cum, the cum is dripping from her mouth, but the cum never comes out of the penis, she don't really jerking off, just 1 movement and stop, etc...
I will try this tips.
Thanks in advance if it works, hehehe!!! I will try this tipd with all other 2.1 Loras too.

@goodstrk Just tried for 3 videos, only adding in low noise model at 075 and it's not working.
I use exactely the trigger sentence, and the girl, is not jerking off and no cum comes out of the penis, the girl is just moving her head open her mouth and saliva drip down her mouth. But girl not cummed at all and not jerked off at all.

@Pat3dx I've had mixed results but nothing consistent so I went back to 2.1 for now. Sometimes spooge from the peen, sometimes from other places, other times nothing. I can say for sure, if you're using any of the speedup loras or if you add like an penis lora into the mix it totally kills it.

@OrionMoonstone Ok, thank you., unfortunately, the jerking off lora made for wan 2.2 from another creator is not working correctly. So for now, no lora can handle masturbation for futanari with Wan 2.2 :(

@Pat3dx ill upload my i2v workflow using guff, try it out. i get a lot of movement.

@OrionMoonstone @Pat3dx   i uploaded a workflow im using and gets pretty consistent result. its 2.2 guff models, im on a 3060 12gb gpu. you can try it out.

 @goodstrk have you discovered any other loras that only work on low noise lol ?

@goodstrk I'm using my new infinite loop WF Wan 2.2 T2V (first scene) +I2V (for all other scenes) I will try another time to add the masturbation lora and see if it works or not.

@ssaeda im stuck on this one lmao

@goodstrk I'm cautiously declaring success using this model. Its basically an amalgamation of the wan 2.2 high, low, and a bunch of NSFW stuff into one single model. I literally just plugged it into my old Wan 2.1 workflow, hooked in the loras, and its spooging like a river. Its on segment 4 of 8 on a 50 second clip it hasn't blown up yet!
https://huggingface.co/Phr00t/WAN2.2-14B-Rapid-AllInOne

@OrionMoonstone when i upgrade my gpu ill try it but this 12gb card struggles with any model around 10gb size. what are you running for a gpu?

@goodstrk O_O I'm running a 12gb 3080 TI. For a 5 second clip it takes about 8 minutes. I usually chain 8 of those together, and with post processing and export it takes a little over an hour. I had to do a bit of tweaking to get Sage Attention loaded straight into Comfy (could never get the patch node to work and the console would say it wasn't running) and I /might/ be cheating a little bit by offloading the clip and clip vision to an old GTX 1070 but ... It runs? ^_^

@OrionMoonstone interesting!

I've noticed the same, but I kind of get around it by mixing "His (or her) penis grows fully hard ..." somewhere into the prompt. >_<

@OrionMoonstone Thanks for that idea! Has your strategy shifted in the last 5 months since you wrote this?

@BigJuggsAI Nope, it still works. Only potential downside I've noticed is if its like a huge gonzo-dong that it doesn't recognize as a penis it'll magically grow a second penis that sticks straight up. :P

@OrionMoonstone Hehehe... yeah have been there and bought that T-shirt! The worst limitation I've seen is that penis must be vertically oriented with glans at the top... downward / sideways just doesn't work as the uretra is either at the penis base or some weird location on the glans...

Also after two days of trying I can't get even close to the AMAZING results I get from this Lora with Wan 2.1. For now I'll drop Wan 2.2 for this until i find some new avenue of research...

@BigJuggsAI Idk, I've been getting mostly good results lately with 2.2. Its just been hit or miss until recently. At first I couldn't get it to work at all, then after I think an update to Comfy and some workflow tweaks (who knows what that was given how I'm constantly tweaking noodles in this thing) it just took off and started working.

@OrionMoonstone Interesting. Try my observation (that I've noticed after hundreds of generated videos) where penises that are mostly upright work great and downward a no go (with sideways a hit or miss where frequently semen doesn't come out of the uratra but the top of the glans). From my experimentation, this is the best semen Lora by quite a margin IF the penis is mostly upright AND it's used on Wan 2.1. (Wan 2.2 results mediocre at best)

To The OP and commenters of this particular comment, in your experience with this lora, has the issue of no eye-contact with the camera, or just minimal eye contact with the viewer been an issue in your generations? I can't for the life of me prompt the ai into keeping the eyes open or up. Any suggestions would be awesome!

how

Found the fix:

Node: Load Image Batch

Path - You have to direct where you want the image to be saved

Create a folder to save the work and then put that location in the path

I too would love to see the best cum Lora updated for Wan 2.2 (And if not possible then a good workflow that makes it work well on Wan 2.2 low-noise.) Does anyone have a Wan 2.2 solution that gets results as good as in a Wan 2.1 workflow?

I am also trying to switch all my stuff to amazing Wan 2.2 but I can't get the cum to work as good as this Lora on Wan 2.1. Has anyone been able to either 1) get this Lora to work as well on Wan 2.2 or 2) get another cum Lora to work as well natively on Wan 2.2?

I have noticed the same and would love to know what to do too...
Q: How is the 'volume of cum' in Wan 2.2 versus its (awesome!) performance in Wan 2.1?

yes just only use the low model and dont use high model. i have a workflow on my page that i use. very simple.

@goodstrk Thanks for the important info. Is 1.0 on low the right strength?

@BigJuggsAI 0.7 works for me on low. 1 seems to grainy

@goodstrk Thanks for the tip!

I have observed that hand movement on the penis is much improved (with a more realistic penis skin movement) on Wan 2.2. Unfortunately after a couple days of rigorous testing I can't make this amazing Lora as amazing as I can make it on Wan 2.1!!!

How do you use this lora in a Wan 2.2 workflow with High/Low noise setups and multiple samplers?

@Eshinio i use this LoRa only in Low at 0.7 weight, which is the sweet spot for me. The provided prompt also practically works every time, unless the character (penis) is in a drastically different pose, like upside-down. In these cases the LoRa will deform the penis and/or start ejaculating "white sticky liquid" from your character's mouth.
Hope this helps you out. Good luck, and tag me when you post your video ;)

Well, it's not a wan2.2 lora. You should be able to find it if you delete the 2.2 checkpoint.