v 1.4.3Krea2 Selective LoRA Loader - Projection SplitSeparate model-only LoRA controls for the three Krea2 text-conditioning branches:<ul><li><code>load_projection</code>: <code>txtfusion.projector</code> only.</li><li><code>load_textfusion</code>: all other <code>txtfusion</code> tensors, including layerwise and refiner blocks.</li><li><code>load_txtmlp</code>: the linear layers under <code>txtmlp</code>.</li></ul>All non-text-path tensors, including the 28 shared DiT blocks, remain loaded.Essentially this is an alternative Loader for people who are struggling with "Character LoRA — Image Only", so use Krea2 Selective LoRA Loader - Projection Split and disable the load_textfusion as this is what causes some weird artifacts.<hr />v 1.4.0:Character LoRA — Image OnlyWhy use this loader?A character LoRA can change more than likeness. Adding one to an otherwise working setup can make requested details less reliable or change how other LoRAs behave. This loader is designed to reduce that interference while keeping the character's influence on the image.Krea2 processes the prompt and image together through shared layers. With a regular LoRA loader, character updates to those layers apply to both the image and the prompt's internal representation. Excluding weights for dedicated text-processing layers still leaves this shared route active.This loader filters the supported weights and applies the character updates only to image tokens. That removes their direct contribution to text tokens while preserving other connected LoRAs. It targets one source of overlap; normal interaction between text and image remains, so results still depend on the character LoRA and the rest of the workflow.<hr />v 1.3.0I added phrase-level attention control to the latest update.The idea is simple: sometimes you don’t need to push the entire prompt harder. You need Krea2 to pay more attention to the few words that actually reinforce the idea you’re trying to get through.So now you can do:<code>a (specific important phrase:1.8) with the rest of the prompt written normally</code>and selectively increase or decrease how much attention those words receive.This is done without scaling, duplicating, deleting, or otherwise changing Krea2’s original 12×2560 Qwen conditioning. The prompt gets encoded normally, the node finds the exact Qwen token rows belonging to the weighted phrase, and the weight is applied to image→text attention inside the shared DiT blocks.<code>1.0</code> = untouched <code>&gt;1.0</code> = more attention priority <code>&lt;1.0</code> = less attention priority <code>0.0</code> = suppressionIt also has an inspection output showing exactly which Qwen token rows/pieces were matched, so there’s no guessing about what the weight actually landed on.Basically: instead of turning the entire prompt up, you can now point at the parts that matter and tell Krea2 pay more attention to this.<a target="_blank" rel="ugc" href="https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer">Included in the latest Krea2T Enhancer update</a>.It is best when used with the <a target="_blank" rel="ugc" href="https://civarchive.com/models/2775340/krea2-textfusion-refusal-reduction-lora">refusal reduction LoRA</a> as they complement each-other nicely<a target="_blank" rel="ugc" href="https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer/blob/main/workflows/workflow_encoder.json">Sample Workflow</a>And yes, I know <code>(word:1.5)</code> looks like we somehow got teleported back to the SDXL days haha. The logic underneath it definitely did not though.<hr />Additional updateAdded Krea2 Turbo Reference Sigmas (From Latent) to the same repo.This is a separate scheduler node that creates a Turbo sigma schedule based on the official Krea2 Turbo scheduler settings. Connect the loaded model and the same Empty Latent Image used for sampling, then send its SIGMAS and LATENT outputs to the sampler.It defaults to 8 steps, checks that the image dimensions are valid for the model, and keeps the Turbo schedule aligned without manually guessing sigma values.IMPORTANT: The Empty Latent width and height must both be divisible by 16. If the node gives you a dimension or alignment error, fix the Empty Latent dimensions first. That error is intentional and does not mean the node is broken. Please verify both values are divisible by 16 before reporting an issue.More technical details are available in the <a target="_blank" rel="ugc" href="https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer/tree/main">GitHub README</a>.<hr />Additional updateAdded Krea2T Enhancer Advanced to the same repo now, original node is still there and untouched.This is basically the same enhancer but with one extra knob called <code>text_scale</code>, this knob controls the fused text tokens right after <code>txtmlp</code> before they enter the shared Krea2 stream. so if strength alone is not landing the prompt fully, this gives another cleaner push without adding more workflow mess.Use either the original node or the advanced node, do not stack both unless you are intentionally testing weird behavior.Start with:- <code>strength</code>: <code>1.00</code>- <code>text_scale</code>: <code>1.00</code>Then raise <code>text_scale</code>, I have been pushing it around <code>1.50 - 2.00</code>.Again this is still experimental, but this update gives a more direct text scale control while keeping the setup as one MODEL-in / MODEL-out node.<hr />Updated the node with bug fixes now you can push the strength to 2.00 start with 1.00 and increase to get better adherence for certain cases. sweet spot 1.00 - 1.05With Lora it varies as sometimes even 0.90-0.95 is more than enough. so when using a lora start experimenting from 0.05 until you find a sweet spot :)<hr />Small experimental ComfyUI node for Krea2 Turbo prompt adherence. patches the Krea2 model path at runtime and applies a controlled adjustment inside the text-fusion stage, instead of rewriting the prompt or adding extra conditioning nodes. It current scope is simple:- one MODEL-in / MODEL-out node- strength control- debug toggle for runtime diagnostics- no extra dependenciesRepo: <a target="_blank" rel="ugc" href="https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer">https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer</a>This is still experimental, so treat it as an early testing release. The goal is better prompt follow-through on Krea2 workflows while keeping the setup minimal.Your discretion is advised "proof of concept only" Gore content advisory, Do NOT click the link if you are not comfortable with this type of content <a target="_blank" rel="ugc" href="https://imgur.com/a/5ZwrCIb">https://imgur.com/a/5ZwrCIb</a>For people who's interested in the technical side you can find a bit more of explanation <a target="_blank" rel="ugc" href="https://github.com/capitan01R/ComfyUI-Krea2T-Enhancer/issues/1#issuecomment-4792914981">here</a>

ComfyUI-Krea2T-Enhancer (new) "selective LoRA Loader"

v 1.4.3 add selective_lora_loader

comfyuiKrea2tEnhancerNew_v143.zip

v1.4.3

v1.4.2

Files with SHA256: 54f61bf24d5f6a96b48694004d39c94ae491cb11743daae90b677333fc327a46