This is the UPDATE version of the Rockwelly S1 model.Feel free to test and use it.The Update Version follows the same principles as Version 1 (previous)!Reason for updating Project S1:1: Many errors were found in areas such as eyes and hands.2: Due to the model's sensitivity to prompts (if the prompt wasn't detailed enough), the images don't come out uniform.3: Compatibility with multiple loras.Version S1 v1 at1 is an update version of the project. The issues mentioned above have been fixed.Recommendations:1: Know how to describe your prompt (putting things like "looking down" and then putting "looking up" in the same prompt) will cause aberrations in your generation. Therefore, REVIEW YOUR PROMPTS.2: Note that (in this model's case), you can "play" with the Denoise. You can keep it at (low ha: 0.75) up to its maximum (high: 1.0). Doing so (with the seed fixed) will give you different effects and sometimes different results.SETTINGS:The Ksampler settings haven't changed much. However, you can have more freedom with the settings and steps.Minimum recommendations:Steps: 22CFG: 1.4Sampler_Name: Euler_AScheduler: KarrasFor different effects, you can use Sampler_name: Res_Multistep with Scheduler: Sgm_uniform; they also give good results (depending on what you plan to do).Once again, I humbly ask that if you liked this model, please post your creations and feedback after downloading it. This will help me understand how this model can be improved. I use two versions of the template: one for creating the image and the other as a refiner. In the refiner, you reduce the noise reduction. Otherwise, unwanted objects or objects will appear. Since I use both templates, I know how high I can set the refiner's noise reduction. But I recommend leaving it at 25, 30, or 40, depending on what you intend to do.Configuration:Step 1 = Image Generation(Ksampler: RES_MULTISTEP + SGM_UNIFORM / steps: 22 cfg: 1.5 / 1.4 (sometimes at 1) DENOISE AT 0.8 OR 1)Step 2: Ksampler: LCM + BETA / steps: 22 or 30 CFG: 1.4 / 1.5Step 3: Ksampler: Euler A + Karras / steps: 35 Cfg: 4.5 &lt;&lt;&lt; This configuration creates more anime-style images. &lt;&lt;&lt;&lt;Step 2 = Bug fixes in the Face, Hands, and Eyes Detailer (I rarely use it because the model defines the hands and face well, especially if you use a refiner.)Step 3 = UpScale and DownScale(I leave the Upscale at 2x AnimeSharpv4_RCAN) (For anime images, and for realistic or semi-realistic images, I switch to RealESRGAN.)Step 4 = Refinement(Ksampler: euler_a +Karras / steps: 10 cfg: 1.0 / noise reduction: 0.30 or 20)(Any value above 40 will modify your image and cause unwanted effects.)Step 5 = Contrast adjustments and image post-processing. And if you liked my work, follow me on social media. All the images I post on social media are generated from my models, whether test or finished versions.Below is a summary of the first version with information about it.Since this is my first model, there may be some flaws (nothing that is a problem and cannot be fixed with a refiner or a second attempt with KSampler or USDU (Ultimate Upscale)). Currently, my only priority has been trying to infuse the TensorArt TurboX LoRA 8-step [SD3.5 large] (<a target="_blank" rel="ugc" href="https://civarchive.com/models/1362210/tensorart-turbox-lora-8-steps-sd35-large">https://civarchive.com/models/1362210/tensorart-turbox-lora-8-steps-sd35-large</a>) with one of my Checkpoint models and Qwen Image Lightning 4-8 steps(<a target="_blank" rel="ugc" href="https://civarchive.com/models/1862507/qwen-image-lightning-workflow-4-8-steps">https://civarchive.com/models/1862507/qwen-image-lightning-workflow-4-8-steps</a>).The reason is clear:"My graphics card is a GTX 1060/6GB," so you can see how much I struggle to generate good images.That's why I've been working (slowly and carefully) on a checkpoint that allows me to balance speed and quality. ** IT'S NOT PERFECT YET (THE WAY I WANT IT), BUT IT'S ALREADY SURPRISED ME ENOUGH TO SHARE IT WITH YOU.Please help with the testing and post your results. The current settings are:Steps: 22cfg: 1.0 / 1.5 (my recommendation is not to exceed this value if using EULER A)Scheduler: KarrasI sometimes tested with Res_Multistep + Sgm_ufiformSteps: 22 / 25cfg: 1.0 / 1.5The results were sometimes satisfactory.This is because I tested with the simplest workflow possible.Time to beg:"If you liked this checkpoint and would like to support my work, please consider following me on social media and following me, as I will always be looking for ways to improve this project and develop new ones (even with the limited resources of a GTX 1060/6GB)."Enviar feedbackPainéis lateraisHistóricoSalvas

Rockwelly Style S1

This is the UPDATE version of the Rockwelly S1 model.Feel free to test and use it.The Update Version follows the same principles as Version 1 (previous)!Reason for updating Project S1:1: Many errors were found in areas such as eyes and hands.2: Due to the model's sensitivity to prompts (if the prompt wasn't detailed enough), the images don't come out uniform.3: Compatibility with multiple loras.Version S1 v1 at1 is an update version of the project. The issues mentioned above have been fixed.Recommendations:1: Know how to describe your prompt (putting things like "looking down" and then putting "looking up" in the same prompt) will cause aberrations in your generation. Therefore, REVIEW YOUR PROMPTS.2: Note that (in this model's case), you can "play" with the Denoise. You can keep it at (low ha: 0.75) up to its maximum (high: 1.0). Doing so (with the seed fixed) will give you different effects and sometimes different results.**SETTINGS**:The Ksampler settings haven't changed much. However, you can have more freedom with the settings and steps.Minimum recommendations:Steps: 22CFG: 1.4Sampler_Name: Euler_AScheduler: KarrasFor different effects, you can use Sampler_name: Res_Multistep with Scheduler: Sgm_uniform; they also give good results (depending on what you plan to do).Once again, I humbly ask that if you liked this model, please post your creations and feedback after downloading it. This will help me understand how this model can be improved. I use two versions of the template: one for creating the image and the other as a refiner. In the refiner, you reduce the noise reduction. Otherwise, unwanted objects or objects will appear. Since I use both templates, I know how high I can set the refiner's noise reduction. But I recommend leaving it at 25, 30, or 40, depending on what you intend to do.Configuration:Step 1 = Image Generation(Ksampler: RES_MULTISTEP + SGM_UNIFORM / steps: 22 cfg: 1.5 / 1.4 (sometimes at 1) DENOISE AT 0.8 OR 1)Step 2: Ksampler: LCM + BETA / steps: 22 or 30 CFG: 1.4 / 1.5Step 3: Ksampler: Euler A + Karras / steps: 35 Cfg: 4.5 &lt;&lt;&lt; This configuration creates more anime-style images. &lt;&lt;&lt;&lt;Step 2 = Bug fixes in the Face, Hands, and Eyes Detailer (I rarely use it because the model defines the hands and face well, especially if you use a refiner.)Step 3 = UpScale and DownScale(I leave the Upscale at 2x AnimeSharpv4_RCAN) (For anime images, and for realistic or semi-realistic images, I switch to RealESRGAN.)Step 4 = Refinement(Ksampler: euler_a +Karras / steps: 10 cfg: 1.0 / noise reduction: 0.30 or 20)(Any value above 40 will modify your image and cause unwanted effects.)Step 5 = Contrast adjustments and image post-processing. Important detail.As you can see in my frequently posted images, the image quality is better.The reason is simple.I work on the images separately.Step 1 = Image generationStep 2 = Error correction in Face Detailer, Hand, and EyesStep 3 = UpScale and DownScaleStep 4 = RefinementStep 5 = Contrast adjustments and image post-processing.So, don't just copy the prompt and wait for the magic to happen.You'll need to put in some effort, whether with this model or any other.REMEMBER:"**AI-GENERATED IMAGES ARE LIKE PHOTOGRAPHS**.THE MORE YOU DEDICATE TO MAKING AN IMAGE, THE CLOSER YOU WILL BE TO AN AMAZING IMAGE! ++++++++++^^^~^~^++++++++++++++^^~~^^~^~^^~~~~^~^^^^~~~~+++++++++++++++And if you liked my work, follow me on social media. All the images I post on social media are generated from my models, whether test or finished versions.Below is a summary of the first version with information about it.Since this is my first model, there may be some flaws (nothing that is a problem and cannot be fixed with a refiner or a second attempt with KSampler or USDU (Ultimate Upscale)). Currently, my only priority has been trying to infuse the TensorArt TurboX LoRA 8-step [SD3.5 large] (<a target="_blank" rel="ugc" href="https://civitai.com/models/1362210/tensorart-turbox-lora-8-steps-sd35-large">https://civitai.com/models/1362210/tensorart-turbox-lora-8-steps-sd35-large</a>) with one of my Checkpoint models and Qwen Image Lightning 4-8 steps(<a target="_blank" rel="ugc" href="https://civitai.com/models/1862507/qwen-image-lightning-workflow-4-8-steps">https://civitai.com/models/1862507/qwen-image-lightning-workflow-4-8-steps</a>).The reason is clear:"My graphics card is a GTX 1060/6GB," so you can see how much I struggle to generate good images.That's why I've been working (slowly and carefully) on a checkpoint that allows me to balance speed and quality. ** IT'S NOT PERFECT YET (THE WAY I WANT IT), BUT IT'S ALREADY SURPRISED ME ENOUGH TO SHARE IT WITH YOU.Please help with the testing and post your results. The current settings are:Steps: 22cfg: 1.0 / 1.5 (my recommendation is not to exceed this value if using EULER A)Scheduler: KarrasI sometimes tested with Res_Multistep + Sgm_ufiformSteps: 22 / 25cfg: 1.0 / 1.5The results were sometimes satisfactory.This is because I tested with the simplest workflow possible.Time to beg:"If you liked this checkpoint and would like to support my work, please consider following me on social media and following me, as I will always be looking for ways to improve this project and develop new ones (even with the limited resources of a GTX 1060/6GB)."

Files with SHA256: 1b0dac040c27026c13d2de2f5e7add72f2c1e6f1d8d5ba0150cd72d6707514b1